冰箱用扭转制冰机的设计研究

通过参考国内外的相关文献,对制冰机进行分类,并且根据实际工作经历,着重介绍了扭转式制冰机的工作原理与设计注意事项,同时也为专业技术人员设计扭转式制冰机提供参考依据。     

Scheme to measure the expectation value of a physical quantity in weak coupling regime

In quantum mechanics, the expectation value of an operator can be measured by using the projective measurement, ifthe coupling between the measured system and pointer is strong enough. However in the weak coupling regime, the pointercan not show all the eigenvalue of the physical quantity directly due to the overlapping among the pointer states, whichmakes the measurement of the expectation value difficult. In this paper, we propose an expectation value measurementmethod in the weak coupling regime inspired by the weak measurement scheme. Compared to the projective measurement,our scheme has two obvious advantages. Experimentally we use the internal state and motional state of a single trapped40Ca+ to establish the measurement scheme and realize the proof of principle demonstration of the scheme.     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

The effects of pre-equilibrium emission and secondary decay on the determination of freeze-out volume at intermediate energies

The effects of pre-equilibrium emission and secondary decay on the determination of the freeze-out volume are investigated using the isospin-dependent quantum molecular dynamics model accompanied by the statistical decay model GEMINI. Small-mass projectiles and large-mass targets with central collisions are studied at intermediate energies. It is revealed that the proton yields of pre-equilibrium emission are smaller than those of secondary decay. However, the determination of the freeze-out volume from the proton yields is more easily affected by pre-equilibrium emission. Moreover, the percentage of proton yields in the freeze-out stage is found to be approximately 50%.     

Thermal stress reduction of GaAs epitaxial growth on V-groove patterned Si substrates

We investigate the thermal stresses for GaAs layers grown on V-groove patterned Si substrates by the finite-element method. The results show that the thermal stress distribution near the interface in a patterned substrate is nonuniform,which is far different from that in a planar substrate. Comparing with the planar substrate, the thermal stress is significantly reduced for the Ga As layer on the patterned substrate. The effects of the width of the V-groove, the thickness, and the width of the SiO₂ mask on the thermal stress are studied. It is found that the SiO₂ mask and V-groove play a crucial role in the stress of the Ga As layer on Si substrate. The results indicate that when the width of V-groove is 50 nm, the width and the thickness of the SiO₂ mask are both 100 nm, the Ga As layer is subjected to the minimum stress. Furthermore,Comparing with the planar substrate, the average stress of the Ga As epitaxial layer in the growth window region of the patterned substrate is reduced by 90%. These findings are useful in the optimal designing of growing high-quality Ga As films on patterned Si substrates.     

Development of Sulfonic-Acid-Functionalized Mesoporous Materials: Synthesis and Catalytic Applications

Sulfonic acid based mesostructures (SAMs) have been developed in recent years and have important catalytic applications. The primary applications of these materials are in various organic synthesis reactions, such as multicomponent reactions, carbon–carbon bond couplings, protection reactions, and Fries and Beckman rearrangements. This review aims to provide an overview of the recent developments in the field of SAMs with a particular emphasis on the reaction scope and advantages of heterogeneous solid acid catalysts.     

Applicability of ~9Be global optical potential to reactions of ~(7,10,11,12)Be

Elastic scattering angular distributions and total reaction cross-sections of ~(7,10,11,12)Be projectiles are predicted by the systematic ~9 Be global phenomenological optical model potential for target mass numbers ranging from24 to 209. These predictions provide a detailed analysis by their comparison with the available experimental data.Furthermore, these elastic scattering observables are also predicted for some targets out of the mass number range.The results are in reasonable agreement with the existing experimental data, and they are presented in this study.     

Phase Modulating of Cu–Ni Nanowires Enables Active and Stable Electrocatalysts for the Methanol Oxidation Reaction

The design and development of non-noble metal alternatives with superior performance and promising long-term stability that is comparable or even better than those of noble-metal-based catalysts is a significant challenge. Here, we report the thermal-induced phase engineering of non-noble-metal-based nanowires with superior electrochemical activity and stability for the methanol oxidation reaction (MOR) under alkaline conditions. The optimized Cu–Ni nanowires deliver an unprecedented mass activity of 425 mA mg⁻¹, which is 4.3 times higher than that of the untreated one. Detailed catalytic investigations show that the enhanced performance is due to the large active area, the increased number of active sites (NiOOH), and fast methanol electrooxidation kinetics. In addition, the generated hollow feature in the nanowires provides a unique void space to release the volume expansion, where the activity can be maintained for 5 h without a distinct activity decay. The present work emphasizes the importance of precisely phase modulating of nanomaterials for the design of non-noble metal electrocatalysts towards the MOR, which opens up a new pathway for the design of cost-effective electrocatalysts with promising activity and long-term stability.     

Recent progress on the frontiers of polyoxometalates structures and applications

<正>Polyoxometalates (POMs), a class of discrete anionic metal oxides in groups Ⅴ and Ⅵ, are constructed via the condensation of metal oxide polyhedral (MO_x, M=W~(Ⅵ), Mo~(Ⅵ),V~Ⅴ, Nb, Ta, etc. and x=4–7) with each other in a corner-,edge-, or rarely in a face-sharing manner [1–3]. Up to now,the broadening family of POM derivatives ranges from small